Porsche Enthusiasts Club Forum
http://forums.tipec.net/

porsche 944 - Oval dash S2 & LUX parts
http://forums.tipec.net/viewtopic.php?f=36&t=23115
Page 1 of 1

Author:  Sconhead [ Fri Dec 29, 2017 4:15 pm ]
Post subject:  porsche 944 - Oval dash S2 & LUX parts

Hi

Due to the acquisition of 944 turbo project i'm shelving the current car I was building.
therefore the following items are up for sale.

Tin top oval dash shell to include the log book, the shell has been completely stripped soda blasted and epoxy primed
ready for new sills and further fabrication, it'll build into a really great car once complete, I have lots of pictures
so please pm if interested - I do also have panels available at additional cost. £350

1989 s2 3.0 engine
the engine has been stripped for rebuild, all parts are there including some ancillaries.
The head, cams and crank are in very good condition, however 1 bore does have some scoring
and this would need to be resolved before rebuild. Personally I was going to fit liners and forged pistons.
again pictures available - SOLD

1989 S2 - abs module and engine ECU £100

S2 airbox - good condition £80

S2/968 front and rear brembo 4 pots - (SOLD)

S2 victor Reinz gasket set brand new - SOLD

1989 2.7 gearbox - £60 (SOLD)
1986 2.5 gearbox - £60 (SOLD)

Genuine sachs full clutch kit in the box brand new to fit 2.5/2.7 & 3.0 - (SOLD)

Also available -
black steering wheel £70
Porsche script door handles & key - SOLD
black door cards (oval dash) - SOLD
working oval dash clock £80
un cracked black dash (oval) £150
23mm front arb powdercoated and poly bushed including brackets - £60
16mm rear arb powdercoated - £15
black carpets (oval), fuel tank, looms, torque tube etc too much to list....

PM with any inquiries

Author:  Sconhead [ Fri Dec 29, 2017 9:32 pm ]
Post subject:  Re: porsche 944 - Oval dash S2 & LUX parts

BTW I am open to sensible offers on some of the parts

Author:  sgl1966 [ Sat Dec 30, 2017 8:50 am ]
Post subject:  Re: porsche 944 - Oval dash S2 & LUX parts

Sent pm about door cards. Thanks

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/