Does anyone have one or a pair of these or the 924 style.
Pins aren't necessary as I have a new set.
| Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
| Wanted - hatch pin base http://forums.tipec.net/viewtopic.php?f=36&t=22933 |
Page 1 of 1 |
| Author: | caprixpack [ Fri Sep 15, 2017 2:09 pm ] |
| Post subject: | Wanted - hatch pin base |
Does anyone have one or a pair of these or the 924 style. Pins aren't necessary as I have a new set.
|
|
| Author: | MichaelW944 [ Sat Sep 16, 2017 6:02 pm ] |
| Post subject: | Re: Wanted - hatch pin base |
They're about £40 each from OPC. I wouldn't bother trying to force the pins to unscrew as they're usually rusted solid. I had to cut through the pin with a hacksaw and replace the square rubber with the nut in it, they're £7 each from OPC. Unfortunately what looks like a cheap fix with £3.50 pins gets quite expensive, quite quickly. |
|
| Author: | caprixpack [ Sat Sep 16, 2017 8:18 pm ] |
| Post subject: | Re: Wanted - hatch pin base |
What happened was I was trying to replace the old worn pins. But while trying to undo the 2 screws that hold the base in place, one rounded out. So while trying to drill the rounded out screw I noticed a crack in the base and a quick tap with the rubber mallet confirmed it was broken.  I had already anticipated the failure of one or more of the screws, and I already had a new set to replace. Attachment: IMG_16092017_202215.jpg [ 235.67 KiB | Viewed 3575 times ] Attachment: IMG_16092017_202314.jpg [ 167.98 KiB | Viewed 3575 times ] |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|