Porsche Enthusiasts Club Forum
http://forums.tipec.net/

Clutch Alignment tool 1989 911
http://forums.tipec.net/viewtopic.php?f=3&t=2608		 Page 1 of 1
Author:  daniells [ Tue Feb 10, 2009 11:35 pm ]
Post subject:  Clutch Alignment tool 1989 911
Hi
My name is Mike Daniells, I have been a member of TIPEC for 2 years, I have a 1989 3.2 911 Supersport, can any one tell me where I can get a clutch alignment tool from.

Cheers Mike
Author:  tr7v8 [ Tue Feb 10, 2009 11:55 pm ]
Post subject:  Re: Clutch Alignment tool 1989 911
Mike TBH have never owned one. I've always used a socket extension & masking/insulating tape to make the diameters correct. I think Halfords flog a universal one for around 10-15 quid.

PS Hi & Welcome :wave:

PPS You can add your membership number into your details.
Author:  daniells [ Fri Feb 13, 2009 6:22 pm ]
Post subject:  Re: Clutch Alignment tool 1989 911
Thanks for your help Jim, I will enter my membership No when I can find my card

Cheers

Mike
Author:  Siggy [ Fri Feb 13, 2009 6:43 pm ]
Post subject:  Re: Clutch Alignment tool 1989 911
Your membership number is 4683.

That's if your name is Mike Daniels (with one L)

I used alight clutches in 3 ways,

correct tool

By Eye, aligning the splines with the spigot

By Feel if you can feel the outer edge of the friction plate and the pressure plate
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/