| Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
| RDK tyre pressure sensor hole delete http://forums.tipec.net/viewtopic.php?f=27&t=23711 |
Page 1 of 1 |
| Author: | Carrera RSR [ Sun Dec 02, 2018 12:16 pm ] |
| Post subject: | RDK tyre pressure sensor hole delete |
Is there a simple cost effective replacement for plugging/deleting the RDK sensor in 928 rims other than welding up the holes ....... alternatives? Is there a source for good used potentially non working sensors to use as a plug? Need 8! All other parts such as seals and rubber covers look available new. The sensors and retaining rings are spendy parts. I have brand new NOS wheels and would like not to damage them by welding ideally. Thanks in advance |
|
| Author: | Waylander [ Sun Dec 02, 2018 7:27 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
alas I think your going to struggle as they were a Bosch part and according to the Bosch website were discontinued in 1993 http://www.bosch-automotive-catalog.com ... country=XZ Later One 0335561987 Early One 0335561986 I would consider having some made from billet alloy with an O ring grove and screw them in the rims |
|
| Author: | Carrera RSR [ Sun Dec 02, 2018 7:50 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
New sensors are available. With lock rings and seals they are almost £1000 per rim!! So this is why I’m looking for a cost effective plug and play alternative as I don’t need them working. Just one complete knackered one would help in setting up a machine shop to copy... |
|
| Author: | Waylander [ Sun Dec 02, 2018 10:06 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
There is one on ebay.ie |
|
| Author: | Carrera RSR [ Sun Dec 02, 2018 10:44 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Waylander wrote: There is one on ebay.ie Been searching all afternoon. Can’t see it. Just nos ones for mega bucks/euros |
|
| Author: | Waylander [ Mon Dec 03, 2018 6:43 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
I looked again too, could not see it i will have a search of the US and Germany |
|
| Author: | Blackpig [ Mon Dec 03, 2018 7:54 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
The parts list says the sensor o ring is 30x1.5, so a fair indication that the protruding thread was about 30mm so maybe a M30 . You have the wheel so this can be confirmed, you need to know the thread and how long it needs to be. There is a sectional drawing of the installation on p 44-32 which gives some detail, there is an exploded diagram on p 44-31 which gives more detail. It might be worth getting your machine shop to make nuts to suit, they ought to be cheaper than the OPC item. That way you don't have any issue with thread or fit. A quick look at RS suggests o rings ought to cost about £1.50 each for a bag of 5. So not outrageous prices. Question: are there any other folks interested in a set of plugs? Modern TPMS usually transmit actual pressure, does any one have the expertise to get that information to come up in the display. That really would be neat! |
|
| Author: | Carrera RSR [ Mon Dec 03, 2018 8:38 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Waylander wrote: I looked again too, could not see it i will have a search of the US and Germany Been doing this for 2 weeks. No used ones, just new old stock. US 928 specialist wants $150 per sensor.....  Contacted Paul Anderson but no reply |
|
| Author: | Waylander [ Mon Dec 03, 2018 8:54 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
how about giving Paul Anderson a call, he is THE 928 Guru http://www.nixsoft-consulting.co.uk/928spares/ |
|
| Author: | Carrera RSR [ Tue Dec 04, 2018 12:01 am ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Waylander wrote: how about giving Paul Anderson a call, he is THE 928 Guru http://www.nixsoft-consulting.co.uk/928spares/ I have as per previous post. Awaiting a response |
|
| Author: | Waylander [ Tue Dec 04, 2018 12:08 am ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Our posts must have crossed, M30 X 1.5 is not outrageous, I gather Mr Anderson can be hard to get hold of https://www.ebay.co.uk/itm/M30-x-1-5-M- ... ect=mobile |
|
| Author: | JasonGibson [ Tue Dec 04, 2018 12:26 am ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Waylander wrote: I gather Mr Anderson can be hard to get hold of Yep, sometimes. don't bother with email, just call. Nice guy |
|
| Author: | Carrera RSR [ Thu Dec 06, 2018 9:09 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
Working on a bespoke plug. 3D printed proto on its way prior to machining the end result. If anyone is interested then I may be able to commission more sets. |
|
| Author: | Carrera RSR [ Tue Mar 12, 2019 1:12 pm ] |
| Post subject: | Re: RDK tyre pressure sensor hole delete |
I eventually welded the RDK holes up using a milled aluminium 'disc' professionally welded into the opening. At least 2 of the 7x16'' if not all 4 are now for sale as surplus to my needs. They are ready to fit and use on a 928, 944, 924 or any flavour of slammed VW or Audi Can be seen on the front of my car below. Centre caps are not included and can be bought via OPC etc. I am keeping the 8x16 rears and looking to buy 2 more 8x16's if anyone has any or a lead to buy. Thanks 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|