Porsche Enthusiasts Club Forum
http://forums.tipec.net/

944 S2 and Turbo Fog Light Protectors
http://forums.tipec.net/viewtopic.php?f=25&t=8067		 Page 2 of 3
Author:  911perv [ Tue Jul 20, 2010 7:54 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
sulzeruk wrote:
I have put a set of OEM protectors in to get copies made if anyone is interested? DOn't have a solid price yet as need to price up the small bracket components.
Alasdair



What is "OEM protectors"?

Looks like they are available here again;

http://www.type911shop.co.uk/shop/artic ... d%3D974%26
Author:  ben944 [ Tue Aug 03, 2010 1:30 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Hi All,

After quite a few months of development, I can finally announce I have a finished fog light protector for sale. I don't need to tell you how expensive the fog lights are to replace. The protector only takes a few minutes to fit and I think is fairly unobtrusive. I have produced a kit with full fitting instructions to make it easy to fit. The cost: £19.95. I am offering TIPEC members free postage on this item. Read on:

Kit Contents:

Fitting Instructions
2 X Fog Light Protectors
4 X Screws
4 X Screw Covers - chrome effect or plain white (can be painted to colour of the car) Please specify your preference when ordering.

Step 1: Unscrew the trim covers on either side of the fog light. Remove the screws out of the trim covers.

Image

Step 2: Take the first fog light protector. Take a few moments to get the fog light protector orientation correct. Once you’re happy you have the correct orientation of the fog light protector, place the new screws through the screw covers. Pass these through the holes cut in the fog light protector. Now screw the fog light trim covers back on so the fog light protector becomes one complete unit. You are aiming for something that looks like the picture below.

Image

Step 3: Offer the fog light protector assembly up to the fog light. You should be able to screw the assembly back into the fixings from which the original trim cover screws were originally fitted.

Image

Step 4: Fit the screw head caps. And admire.

Image

When viewed from a distance, you can bearly notice that these are fitted. Payment will be taken through PayPal: ben.rodrigues@tiscali.co.uk

Patent applied for. Patent pending.

Hope you like the product.

Ben :bounce:
Author:  ben944 [ Tue Aug 03, 2010 1:35 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
-
Author:  swervedriver [ Tue Oct 19, 2010 9:46 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Just got a set of these off ben. Very pleased with them. Good quality, decent price, quick delivery too. :D
Cheers
Craig.
Author:  Fife [ Sat Dec 11, 2010 11:04 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
My set finally arrived once the posty started delivering again, with delays due to all the snow up here. To be fair posted day after I paid, so hats off for good service, shame about the weather.

with the thaw I shall fit tomorrow, now the car is accessible again.

look superb well packed and thanks for the different sets of fittings, I will go with the silver.
Author:  JW590 [ Sun Dec 12, 2010 10:42 am ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
I've just put my car back on the road, being already fed up with it being sat in the garage after just five weeks. I had recently bought a pair of Ben's fog light protectors so thought it wise to fit them this morning.

Easy job and I can't even tell they're on there. The only tip I would give is that the trim covers, or end caps (or whatever you call the bits of plastic that are screwed on at either end of the fog lights), can be taken apart and washed to get rid of the muck that's inside them and therefore makes the bottom half of them look dirty - as can be seen on Ben's photos. They just unclip. It's definitely worth doing.

Good product though, and like somebody else said, well presented / packaged and quickly delivered.
Author:  frenchy [ Sat May 21, 2011 7:42 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Ben will be ordering another set for my other car soon.
Author:  Craiginuk [ Tue Aug 30, 2011 6:10 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Hi Ben, these look great! Are you still doing them? Craig
Author:  ben944 [ Wed Nov 30, 2011 2:43 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Hi All,

The 944 S2/Turbo Fog Light Protectors I produced are now available to buy through Promax Motorsports. Please see link below:

http://www.promaxmotorsport.co.uk/produ ... turbo.aspx

Promax have asked me to supply the FLP's exclusively to them only. £19.95 + free postage.

All the best,

Ben

p.s. Apologies for the blatant plug.
Author:  torro [ Wed Oct 10, 2012 9:23 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
I just bought a set for my s2 cabrio. Well made, easy to fit. Good job :)
Author:  Tooty [ Thu Dec 20, 2012 1:32 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
swervedriver wrote:
Just got a set of these off ben. Very pleased with them. Good quality, decent price, quick delivery too. :D
Cheers
Craig.



Just reading this thread, and noticed this comment, this really does prove how much of a cockney wanker the pervious owner of my car really was taken a £20 pair of spot/fog light protectors off, amongst other bits & piece's before selling the car !!! :mumum:
Author:  rapidstu [ Sat May 10, 2014 5:23 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Promax are out off stock and i am after another pair for my S2 do you have any more?
Author:  MartinRS2K [ Wed May 14, 2014 7:43 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Sent you a PM

See link below

viewtopic.php?f=25&t=17525
Author:  karozza [ Tue Jan 17, 2017 5:37 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
looks really nice.

Does dirt get behind the protector & is there another alternative, less visible chrome screw covers?

Well done!
Author:  51rider [ Thu Apr 20, 2017 6:07 pm ]
Post subject:  Re: 944 S2 and Turbo Fog Light Protectors
Thanks to Martin, I now have a set for my S2. Will hopefully fit them at the weekend if my back will let me bend down that far by then :roll:
Page 2 of 3 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/