Porsche Enthusiasts Club Forum :: View topic

Porsche Enthusiasts Club Forum http://forums.tipec.net/

924 turbo synchro fix http://forums.tipec.net/viewtopic.php?f=25&t=24542	Page 1 of 1

Author:	Pete 5 [ Tue Sep 15, 2020 8:58 pm ]
Post subject:	924 turbo synchro fix
Hi there i have taken some photos of the fix but can't figure out how to post them here but the principle is simple. my problem was that on my 1982 924 turbo, i had no synchro on first gear but it was staying in gear perfectly on inspecting it it was obvious that the dogs were stopping the synchro ring springing out far enough i measured the synchro ring at 85.4mm then i removed the large cir clip and the synchro ring sprang out to 87.5mm so i simply ground away the lower part of the synchro ring that was interfering with the dogs on a bench grinder, then put it back together and it then measured 86mm after some new seals and oil the gearbox is working perfectly I'm happy to email the photos if this is of any help to anyone cheers Pete

Author:

tr7v8 [ Wed Sep 16, 2020 9:12 am ]

Post subject:

Re: 924 turbo synchro fix

Pete assuming the pics are a sensible size around 800x640 pixels or so, this may mean reducing them in a picture editor.
Then when you write the mail scroll down & you'll find a bit marked "If you wish to attach one or more files" heading.
Click on choose files, find it on your computer & click it, then use the add the file button & you'll see the file name load. Rinse & repeat for each picture. Preview to check they are there, then submit.

Attachments: