General Engine Bay Clips

marks2ply · **Posted:** Fri Aug 21, 2020 8:17 pm

Hi All

Could anyone tell me the name of the general clips used for clipping wiring and vacuum hoses etc within the engine bay?
Secondly is there a set of various sizes that could be readily bought?

Any help would be great.

Regards

Mark

Waylander · **Posted:** Fri Aug 21, 2020 11:44 pm

I have a picture that’s on my phone with all the clips

But I can’t share it on here from my dog n bone

Have you got an email address?

Waylander · **Posted:** Sat Aug 22, 2020 8:41 am

Email sent

stratfordshark · **Posted:** Sat Aug 22, 2020 11:31 am

Omega clips

https://damonengineeringsupplies.com/pr ... ssortment/

Waylander · **Posted:** Sun Aug 23, 2020 9:38 am

Did you get it, was it any use?

Endoman · **Posted:** Mon Aug 24, 2020 10:04 am

Found this on Rennlist :- https://rennlist.com/forums/993-forum/7 ... -ties.html

Waylander · **Posted:** Mon Aug 24, 2020 11:55 am

that should help everyone

Wh1t3Kn1ght · **Posted:** Mon Aug 24, 2020 9:34 pm

If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine.

Waylander · **Posted:** Tue Aug 25, 2020 4:29 pm

well still looking but this might be handy at the price

https://www.bresco.com/acatalog/Plastic ... tml#SID=22

these possibly

https://fastener.averydennison.com/en/h ... -ties.html

https://fastener.averydennison.com/cont ... ev%20A.pdf

page 31-32

Waylander · **Posted:** Tue Aug 25, 2020 4:34 pm

Wh1t3Kn1ght wrote:

If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine.

think there is 5 or 10 a bag

and they were used on every car between 1970 and 2005,

Wh1t3Kn1ght · **Posted:** Tue Aug 25, 2020 8:38 pm

Waylander wrote:

Wh1t3Kn1ght wrote:

If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine.

think there is 5 or 10 a bag

and they were used on every car between 1970 and 2005,

That teaches me to read a bit better - the description in PET2 is "cable ties" not "cable tie" so hopefully it is a bag of 5 or 10 like you say.

Will get that added to my ever increasing parts order list...

karozza · **Posted:** Sun Aug 30, 2020 1:04 pm

Wh1t3Kn1ght wrote:

If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine.

I think WURTH should have these, or very similar.

karozza · **Posted:** Sun Aug 30, 2020 1:05 pm

Waylander wrote:

that should help everyone

Great pic, thanks for sharing.

Porsche Enthusiasts Club Forum

General Engine Bay Clips

Who is online