Head Lamp Levelling Control

Picard1701 · **Posted:** Fri Sep 20, 2019 3:16 pm

So the Head Lamp Levelling Switch in my 944 was not working when I moved it from 0 to 1 or 2.

Checked the little motors to find the wires cut!!! (Photos). Where do they connect to? Just can find where to reconnect!

Thank you.

Waylander · **Posted:** Fri Sep 20, 2019 5:41 pm

pictures are massive and grainy, they need shrinking before posting, so it looks like the plug is in the little motor in pic 2,

hard to see, should connect to the main loom, probably cut due to a short in one of the motors but why not unplug???

the motors are about £100 each, need to find the ends of the wires

this is a good free tool for shrinking your pics
https://www.bricelam.net/ImageResizer/

Picard1701 · **Posted:** Fri Sep 20, 2019 5:43 pm

Waylander wrote:

pictures are massive and grainy, they need shrinking before posting, so it looks like the plug is in the little motor in pic 2,

hard to see, should connect to the main loom, probably cut due to a short in one of the motors but why not unplug???

the motors are about £100 each, need to find the ends of the wires

this is a good free tool for shrinking your pics
https://www.bricelam.net/ImageResizer/

Thank you. Will use the tool. Many many thanks

Porsche Enthusiasts Club Forum

Head Lamp Levelling Control

Who is online