| Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
| Supercharged :)))) http://forums.tipec.net/viewtopic.php?f=25&t=23473 |
Page 1 of 1 |
| Author: | jenko [ Thu Jul 19, 2018 2:46 pm ] |
| Post subject: | Supercharged :)))) |
So, after having a replacement windscreen fitted following it breaking on rough ground in goodwood car park, my temp gauge has started working properly ?? ( Go figure)  So with this new found confidence I have a bought an Eaton m62 supercharger !  Watch this space for updates ... ££££'s to be spent I would welcome any advice or previous experience from anyone on here... ( And for the record I have done my driving training and I don't want a 951...) |
|
| Author: | scam75 [ Thu Jul 19, 2018 3:41 pm ] |
| Post subject: | Re: Supercharged :)))) |
Brave man! Good luck! I have infinity boost at the moment due to an inop wastegate. Boost always leads to trauma! |
|
| Author: | jenko [ Thu Jul 19, 2018 4:18 pm ] |
| Post subject: | Re: Supercharged :)))) |
scam75 wrote: Brave man! Good luck! I have infinity boost at the moment due to an inop wastegate. Boost always leads to trauma! Thanks -I have made it far to reliable ..... Its running great atm .... From what I have seen the eaton m62 looks popular for these conversions .... keeping very low boost to keep engine internal as is for now... |
|
| Author: | pauly [ Thu Jul 19, 2018 4:36 pm ] |
| Post subject: | Re: Supercharged :)))) |
jenko wrote: From what I have seen the eaton m62 looks popular for these conversions .... keeping very low boost to keep engine internal as is for now... There could be trouble ahead.... |
|
| Author: | jenko [ Thu Jul 19, 2018 5:29 pm ] |
| Post subject: | Re: Supercharged :)))) |
pauly wrote: jenko wrote: From what I have seen the eaton m62 looks popular for these conversions .... keeping very low boost to keep engine internal as is for now... There could be trouble ahead.... Or fun? Its more interesting than golf... |
|
| Author: | tr7v8 [ Thu Jul 19, 2018 8:48 pm ] |
| Post subject: | Re: Supercharged :)))) |
I looked at supercharging an S2 lump to put in my 944 2.5 started the project then lost interest, more in getting dirty than the project itself. A few pics here; http://www.pbase.com/tr7v8/944_sc_project This was using a centrifugal compressor. I bought a M62 (still got it here) but couldn't get enough room to make it work. I also wrote a spreadsheet to do the calcs which if you pop me an email I will have a look & send you a copy. Also buy a copy of this book. The spreadsheet was written from it & it is a true mine of info. https://www.amazon.co.uk/s/?ie=UTF8&key ... 4892120426 |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|