Porsche Enthusiasts Club Forum

Hi guys

Will the following wheels fit my 944 S2 without spacers?

7.5J x 17-ET65 front
9J x 17-ET55 back

Ive been looking at http://www.1010tires.com/WheelOffsetCalculator.asp a great online wheel offset calculator (recommended by other posters). If I am correct and the ET figure above is the offset; then they will fit BUT with 16mm less inner clearance - so I suppose that means spacers....

I know about fitting 968 caster mounts etc

Cheers Rob

The backs should be OK, but the fronts will need spacers (as you suggest) as the S2s need ET52 all round. I'd be interested to see some photos if you fit them .

Phil

Thanks Phil

They were on ebay this afternoon - a nice set up cup alloys, so someone got a bargain. I let them go as I don't really like spacers - had a bad experience when I was a teenager with my first mini

I was just a bit confused by what the ET stood for - but realised it could only be offset!

Cheers