Porsche Enthusiasts Club Forum

It is currently Thu Mar 28, 2024 2:34 pm
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 16" teledials with 65.2 offset?
PostPosted: Fri Sep 27, 2013 2:59 pm 
Offline

Joined: Tue Jun 11, 2013 11:25 am
Posts: 44
TIPEC membership: 0
I've come across a set of 16" 7j teledials for sale but the seller states they are 65.2 offset. I under the impression these only came in 23.3 and 52.3 offset?

Quote:
An extremely clean set of wheels, wrapped in 195 40 16 rubber with good tread on all. The wheels are 16" , 7J wide all around and come in a very rare 65.2 offset.


Any ideas?


Top
 Profile  
Reply with quote  
 Post subject: Re: 16" teledials with 65.2 offset?
PostPosted: Sat Sep 28, 2013 5:58 pm 
Offline

Joined: Tue Nov 27, 2007 1:01 am
Posts: 163
Location: Devon
Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones.


Top
 Profile  
Reply with quote  
 Post subject: Re: 16" teledials with 65.2 offset?
PostPosted: Mon Sep 30, 2013 12:47 pm 
Offline

Joined: Tue Jun 11, 2013 11:25 am
Posts: 44
TIPEC membership: 0
bmjb wrote:
Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones.


Thanks, I wonder if there are any photos of 944's with the ET65 wheels on? Presumably they'll stick out into the arches slightly more? And I guess these are quite rare and hence demand abit of a premium over the standard 15" teledials.


Top
 Profile  
Reply with quote  
 Post subject: Re: 16" teledials with 65.2 offset?
PostPosted: Tue Oct 22, 2013 8:21 pm 
Offline

Joined: Thu Oct 17, 2013 9:46 pm
Posts: 78
TIPEC membership: 0
Apparently the 928 16" teledials are in demand, viewtopic.php?f=27&t=13985&start=15

Might be worth getting if they're a good price?

_________________
1996 986


Top
 Profile  
Reply with quote  
 Post subject: Re: 16" teledials with 65.2 offset?
PostPosted: Fri Nov 01, 2013 10:47 am 
Offline

Joined: Tue Sep 23, 2008 7:18 pm
Posts: 1955
Location: Sheffield: Rome of the North!
TIPEC membership: 0
Theyll look pretty bad on a 944. The excessive offset and the modest width means that the whole centre is proud of the wheel.

_________________
Simon On The Edge..... In The Hedge!

1988 944 Turbo - the Pink Pig
1989 944 2.7
1985 944 It's alive!
1986 944 Automatic


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group