Hi all,
I haven’t been able to try and start my ‘new’ 924s as it has the above immobiliser fitted but I don’t have the fob. I’ve been under the dash and have found the control box and have traced the wires back. There were much more wires than I thought but they seem to be joined into the ignition wires as well as a relay being fitted.
I’m no electrician but I understand that this has been spliced into the existing wiring so hopefully I can cut the immobiliser out and reinstate the original wiring? If this is correct, can anyone help with what to cut and what to join.
Hopefully the pic will help, the yellow circled joins are from the box into the ignition wires and the green is the relay which looks to into the main live and another smaller live.
Thanks
| Attachments: |
|
8CF357A4-E776-4490-BD88-F0E5E56F06D3.jpeg [ 113.1 KiB | Viewed 4214 times ] |