Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
Trying to find 12 volts on reversing lamps http://forums.tipec.net/viewtopic.php?f=13&t=23506 |
Page 1 of 1 |
Author: | sstman [ Wed Aug 08, 2018 9:30 pm ] |
Post subject: | Trying to find 12 volts on reversing lamps |
I’ve been fitting a reverse camera to my 2007 Cayman, found a combined camera and number plate light unit, so no drilling required on bumper! Just trying to find a 12 volt live via the near side light cluster, but to no availe.? Using a multi meter I’ve not found any voltage, even using the wiring diagram for the light units. What am I missing ? So far I’ve only managed to pop the fuse that protects the near side rear light cluster. |
Author: | Waylander [ Thu Aug 09, 2018 12:32 pm ] |
Post subject: | Re: Trying to find 12 volts on reversing lamps |
you will seriously upset the CANBUS system by attaching to the light cluster, you would be better by finding a switched live and then the switch line to the Reverse light switch |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |