| Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
| Flag to Teardrop mirrors conversion http://forums.tipec.net/viewtopic.php?f=13&t=17068 |
Page 1 of 1 |
| Author: | beaky [ Wed Feb 19, 2014 9:37 pm ] |
| Post subject: | Flag to Teardrop mirrors conversion |
Hi Folks, I wonder if anyone can help, I have just acquired a set of Tear Drop mirrors for my 1986 Euro Carrera, but need some help on the wiring mapping as the mirror side has 5 wires, but the car side 6 wires as follows: Driver Side Mirror end: Brown Black/Blue Grey/Green White/Red Black/Red Drivers side car end: Brown White Green & Green/White (loop) 2 x White/Green (loop) 2 x Browns Grey/Green Black Passenger Side Mirror end: Brown Grey/Blue Grey/Green White/Red Black/Blue Drivers side car end: White/Blue Green & Green/White (loop) White/Green (loop) Brown Grey/Green Black/Blue Thanks in advance |
|
| Author: | beaky [ Thu Feb 20, 2014 10:10 pm ] |
| Post subject: | Re: Flag to Teardrop mirrors conversion |
Finally worked out the solution, here's goes: |
|
| Author: | beaky [ Fri Feb 21, 2014 9:55 am ] |
| Post subject: | Re: Flag to Teardrop mirrors conversion |
Worked a treat, you just need to remember to ignore/eliminate the loop as follows: Driver’s side White/Brown = Blue/Red *Green & White/Green = White/Red 2 x Brown = Brown Grey/Green = Grey/Green Black = Black Blue * Can be 2 x Black/Brown instead of Green & Green White Passenger side: White/Blue =Grey/Blue Green = White/Red Brown = Brown Grey/Green = Grey/Green Black/Blue = Black/Blue |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|