Porsche Enthusiasts Club Forum

It is currently Thu Mar 28, 2024 4:48 pm
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: '67 Covin outlaw
PostPosted: Wed Nov 20, 2013 3:39 pm 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
Hi all,

Back in May i just bought my first kitcar which is also my first "aircooled" car. its beetle chassis 67 coupe. been off the road for about 7 years, now fitted with a 1.6 xr2i 1600 engine. it took a while to sell my other classic car before i could start work on this.
Image
Image


Its the ideal candidate for what I want to achieve. i would have liked to get a early 911 or 912 but i don't have that kind of money

See the pic below, which is a 912 recently featured in a vw mag. This is the closest i can get to explain where this covin will be heading......

Image


cheers
Matt

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Wed Nov 20, 2013 3:40 pm 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
i took a half day from work 3 weeks ago to get the covin low loaded from its storage in birmingham down to home in warwick. john turned up at 2pm to drag it on the beaver tail and by 3pm was dragged back to its new home.

Image
Image
Image
Image

i can highly recommend john. He's based in Birmingham, reliable, insured but still is keenly priced and always happy to help pushing cars etc.

Later in the evening, instead of dozing off on the sofa, i got myself into the garage to do a brief 1/2 hour of tinkering...ended up in their for 2hours, getting all the junk out of the car and stripping out the carpets and insulation.
Image
the floorpans are really good but still require stripping back and repainting. the paint is bubbly in places with minor surface rust under the paint. not bad for original pans.
Image
Image
Image

the fruits of my labour now skipped:
Image

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Wed Nov 20, 2013 3:41 pm 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
its gonna get a full "backdate" makeover, so it'll look like a pre74 model. i've been collecting bits and bob;s over the last few months. here are a few things to give you an idea:-
Image
Image
Image
Image
Image
Image

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Wed Nov 20, 2013 3:43 pm 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
I'd been mucking about with the starter motor and ultimately had a gut feeling it was kippered. Previously, i fitted a new ignition switch and had wired the starter up, but 50% of the time it would engage and 50% it would just spin up. Had a browse on ebay and got a recondition bosch cvh unit delivered for a reasonable price. this confirmed my suspicions as its engages every time now. :smt019

with that sorted i could refit the exhaust manifold which i bolted in using some new bzp m8 socket heads.
Image
Image
..and because i was getting fed up tripping over the exhaust pipes, i chopped those off....
before:
Image
after:
Image
Certainly not elegant but i will tidy up the tips later. i weighed the discarded chrome tips and was surprised they weighed 2kg- more weight saving on top of the 12kg saved from ditching the whale tail.

moving to the front of the car, a goody box arrived on saturday morning
Image
Image
Image
i had planned to do a light service of the brakes to get it through the mot but the front discs, whilst clearly "new" and unused were quite rusty. So, i took the plunge and ordered the dropped spindles, new bearing kits, new outer tie rods and new balljoints, topped off with new solid discs drilled to 5x130 stud pattern. discs were from machine 7 and the rest from Veewee with 10% off for my first order :smt045

This week, the plan is to clean up/paint the N/S channel where the floorpan bolts to the body is so i can run my 8mm and 6mm fuel lines in there. I'm fitting new stainless m8 floorpan nuts/bolts/washers whilst that is happening. As the paint dries I'll be building up the front hubs on the bench - the spindles need degreasing and painting. then these can be fitted - 165/70/15 kumho's fitted last week.
Image :smt049

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Wed Nov 20, 2013 4:59 pm 
Offline
User avatar

Joined: Thu Oct 07, 2010 1:38 pm
Posts: 838
Location: Somerset
TIPEC membership: 6379
Best of luck with this project. Whilst its not a 'true' 911, I hope it creates interest here with other TIPEC members as it will look fantastic if it achieves the looks of your inspiration cars. The purists may not like it but at least its a Covin and not a real 912 having the hot rod treatment. :D

....... Keep the updates coming.

_________________
Steve
1980 924 Turbo Series 1 - Alpine White & Guards Red
Omega forged pistons, Piper cam, K27/26 hybrid turbo, 951 ducted FMIC, custom intake, Mittelmotor/123ignition, Hayward & Scott, GAZ Golds, Fuch'ed, Quaife LSD


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Thu Nov 21, 2013 9:49 am 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
Carrera RSR wrote:
The purists may not like it but at least its a Covin and not a real 912 having the hot rod treatment. :D

....... Keep the updates coming.


Exactly......i have so much freedom to rod it. If i'd have got a 911 or 912, i'd want to keep it factory spec.

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 22, 2013 10:39 am 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
last night I put some more chassis paint into the floorpan channel where the body bolts through. Its taken a while to do as its one session with the scotchpad and kurust, then one coat of primer then 2 coats of chassis black, which has taken all week. After that, i jacked up the rear and got the wheels off as i'm getting the tyres swapped over on to the rear fuchs tomorrow.
Image
one of the 8x15 wellers with a 225/60 Hankook
Image
i then dug out the pcd adaptors and figured out i need some 'flat to radius' bolt collars and some m14 socket head bolts which i'm ordering today
Image
Final task of the night was to put a final coat of chassis black (its actually a synthetic enamel "top gloss" truckcoat from Jawel paints) on the passenger side dropped spindle, then i can build up that hub
Image
once the front hubs are on, i can fit the new front wheels as i really need to get some space back in the garage
Image

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 22, 2013 4:31 pm 
Offline

Joined: Tue Nov 06, 2007 6:21 pm
Posts: 277
Location: Nr Rugby
Keep posts coming will look superb when done. :thumbright:

_________________
Geoff
1989 911 Speedster
2014 Jaguar XFS


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 22, 2013 5:38 pm 
Offline
Site Admin
Site Admin

Joined: Thu Jan 01, 1970 1:00 am
Posts: 5523
Location: Rochester, Kent
TIPEC membership: 911
Liking those wheels :thumbright:

_________________
Kent & South East London R.O

Join the Club

Silver 1989 911 Speedster
Midnight Blue 2004 996 C4S Cab
Tahoe Blue 1990 964 C2
Zenith Blue 1998 BoxsterSold
Guards Red 1992 944 S2 Cab gone but not forgotten
Mediterranean Blue BMW 530e


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 22, 2013 9:53 pm 
Offline

Joined: Fri Aug 21, 2009 12:58 am
Posts: 1296
Location: Warwickshire
I am surprised to see that you have come onto here, but it is good to see you around these parts.

You probably already know my thoughts on this project. Now, it seems you have most of the ingredients, get back to putting it all together! ;).

_________________
The member otherwise known as Chas

Ex Owner of a 1989 944 S2 and a 1991 944 Turbo (Ex Andrew Sweetenaham (ProMax) car)

Now Porkerless! Now with a 2003 BMW M3 and 1991 Mercedes W124 250D


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Wed Nov 27, 2013 1:54 pm 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
Saturday morning I took the rear fuchs down to my local tyre place to get the 225/60 hankooks swapped over from the wellers. Whilst a few years old, the tyres are unused so will do for now while I get the covin up and running.
Image
Then I fitted new bearings to one of the new Porsche-pcd beetle discs. Fitting is refreshingly simple compared to minis, mgb’s of the same era where you have shims, spacers, tightening up then backing off ¼ turn etc. German efficiently is nice….
Image
Last night, after 2 days of mild norovirus, I attacked the front passenger hub. As the beetle donor is a 67 year model (117 chassis), I’ve got to change to later outer steering rod ends (68 onwards) to fit the dropped spindles. The hub had clearly taken a big knock at some point, as you can see the joint is slightly bent (old one at the top)
Image
I really should do the balljoints too but they look to be a ballache to hammer out if you haven’t got access to a press. Besides, I’ve got a dropped beam that I’ll rebuild next year away. Balljoint look/feel ok though so I’m not concerned ATM.
Image
Everything came away ok but took a bit of wrestling to pop the spindle hub out of the balljoints, then realised I could lower the bottom arm by undoing the damper top mount. Was easy after that….
Image
Image

Final job tomorrow night is to get the grease cap on, secure the speedo cable and fit the caliper.

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 29, 2013 10:03 am 
Offline
User avatar

Joined: Wed Oct 26, 2011 7:40 pm
Posts: 1239
Location: The little old town of East Grinstead, UK
TIPEC membership: 6519
Skype ID: grinlord
Looking good. Does that damper have a nasty crease in it?

_________________
Alex.
'85 944 mostly working
'83 924 "Yin Yang" cheap track car with another member
'01 Vauxhall Combo diesel van for camping, working, and moving slowly

Computer Problems: At your WITS End? http://www.witscomputers.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: '67 Covin outlaw
PostPosted: Fri Nov 29, 2013 10:36 am 
Offline

Joined: Tue Nov 19, 2013 10:40 am
Posts: 17
TIPEC membership: 6950
its just the rubber boot

_________________
Cheers
Matt

'67 Covin 911 outlaw
'72 mini clubman 150bhp
1947 Standard 8 rod
1991 Range Rover Classic Vogue 3.9 v8

Check out RetroWarwick 10th August 2014 http://www.retrowarwick.co.uk


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group