Porsche Enthusiasts Club Forum
http://forums.tipec.net/

What did you do to your Boxster or Cayman today?
http://forums.tipec.net/viewtopic.php?f=10&t=13970
Page 7 of 8

Author:  blackadder30 [ Tue Jul 25, 2017 3:01 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Forgot to mention that the Boxster sailed through her MoT yesterday afternoon so that's four MoT's in as many months! Think the 944 Cab may need a bit more effort before she gets her wings again :lol:

Author:  briggy [ Tue Jul 25, 2017 7:47 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Changed all 6 coil packs. Quite a satisfying job. The hardest part is working out which extension(s) to use. Note that you don't have to remove any of the pipes that are in the way, which makes life a lot easier. Just the rear wheel, a few covers, the cable into the top of the coil pack itself, a single bolt (each), pull the old one out. Simple.

Less than £250 from OPC with the TIPEC discount, so original parts too. Actually cheaper than Design911.

Happy to give more details if anyone's about to do theirs.

Author:  blackadder30 [ Thu Jul 27, 2017 9:48 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Yes, OPC can amaze you with what they can do!

Mine was a did affair tonight as my dilemma with power to the dvr is all sorted with a direct plug into the fuse board. Bottom row is switched live and rows 2, 3 and 4 are permanent live. There are live feeds in a number of slots ready for additional accessories such as dvr's. Job done :D

Image

Image

I've also debadged the rear... Much better and far easier to clean :D

Image

Author:  DavidGardner [ Mon Aug 28, 2017 4:19 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Spent the day detailing my own car, which makes a change from doing other peoples :-)

Attachments:
IMG_2741.JPG
IMG_2741.JPG [ 108.24 KiB | Viewed 14910 times ]

Author:  DavidGardner [ Sat Sep 02, 2017 5:07 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Lovely sunny day, so took the opportunity to fix an irritating issue with the hood, where the edge of the hood tries to fold itself outside the frame over the drivers door. Surprisingly low tech bit of chord with a plastic end that fits into an equally low tech notch in a plastic part. Bit of a fiddle but managed it, not how long it will last, since something made it jump out in the first instance. Then took some time to hoover out the debris in the roof pit, make sure the drain holes were clear and give to seals some feed to keep them supple. All in all a useful afternoon.

Author:  blackadder30 [ Sat Sep 02, 2017 6:34 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Glad you got that sorted David - it's on my "to do" list :)

In the meantime, I stumbled across OPC Tewkesbury this evening and had to drive in for a photo :D

Image

Author:  Sean Smallman [ Sat Sep 02, 2017 6:40 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Car looks good :)

Author:  briggy [ Sat Sep 02, 2017 7:36 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

blackadder30 wrote:

In the meantime, I stumbled across OPC Tewkesbury this evening and had to drive in for a photo :D



That's where I live! Got nothing but good things to say about the guys in there.

Cheers,
Bryan

Author:  DavidGardner [ Sun Sep 03, 2017 3:28 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

:D
blackadder30 wrote:
Glad you got that sorted David - it's on my "to do" list :)

In the meantime, I stumbled across OPC Tewkesbury this evening and had to drive in for a photo :D

Image

Author:  PeteB [ Wed Oct 11, 2017 10:37 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Hi all,

My 2004 Boxster S had a service and inspection at JMG Porsche today.

I now need to arrange JMG Porsche to replace the clutch and I'll bite the bullet and get the ims
bearing changed at the same time. Ouch!!!

Peter

Author:  PeteB [ Wed Oct 25, 2017 10:44 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Hi All,

My Boxster is at JMG Porsche having a new clutch, ims bearing upgrade and replacement rms seal.

There are another couple of jobs to sort out at a later date;
Sunroof tension cables.
Fan ballast resistor

Hopefully collect the car tomorrow.

Peter

Author:  JasonGibson [ Thu Oct 26, 2017 9:57 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

I had a geo check at Centre Gravity last weekend and have issues with both front toe, rear toe and the coffin arms were in need of replacement(I already knew about those) oh and rear tyres on the wear limits (i knew about those too)

My rear tyres are being replaced tomorrow, Continental have stopped making N rated in 255/40 17, so i'm fitting Mich PS2 (my preference of tyre anyway) that leaves the car with Conti on the front until they wear out.

Rear coffin arms arrived today from FrazerPart, they will be fitted on Monday and a full Geo set up performed,
£144 for the pair, not too bad. However to make sure the adjustments can be done now and in future, i've ordered a full set of fixings for rear set up, £67 :shock: and that's after £10 discount form OPC mid Sussex, still far cheaper the other suppliers.

Shame I'll be selling it in the spring :(

Author:  grommett [ Tue Dec 19, 2017 11:21 am ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Went out Saturday in lovely weather with the roof down on a 52 mile round trip to buy cheese :lol:

Author:  PeteB [ Tue Jan 16, 2018 11:01 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

Hi,

Gave the car a drive followed by a clean.

Ordered a set of Zunsport grills.

Peter

Attachments:
19180773-CD6B-41D9-97F2-16CBD63B5908.jpeg
19180773-CD6B-41D9-97F2-16CBD63B5908.jpeg [ 211.88 KiB | Viewed 13689 times ]

Author:  Eltel [ Sun Jan 21, 2018 2:46 pm ]
Post subject:  Re: What did you do to your Boxster or Cayman today?

NSF coil spring broke , so replaced both front springs and osf lower arm whilst I had it all apart

Page 7 of 8 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/